NEAT METAL CUTTING OIL
 

Description

PSO Neat Metal Cutting Oil is a light-color, low-odor and high-sulfur content lubricant that provides outstanding extreme pressure properties. PSO Neat Metal Cutting Oil is synergistic with other extreme pressure chemistries including chlorinated paraffins and alphaolefins, overbased sulfonates and synthetic esters provide outstanding performance on difficult-to-machine metals. Combination additive system of PSO Neat Metal Cutting Oil provides corrosion protection with extended service life of the cutting tool.
 

Applications

PSO Neat Metal Cutting Oil is recommended for machining both ferrous and non-ferrous metals.

It is suitable for machining high alloy, stainless steel and mild metals. In addition, it maintains reserve basicity that performs as an effective rust/corrosion inhibitor.

PSO Neat Metal Cutting Oil is recommended for machine tough ferrous alloys as well as mild steel and cast iron in such operations as:

  • Milling
  • Drilling
  • Turning
  • Grinding
  • Broaching
  • Thread Cutting
  • Tapping
  • Metal Forming
     

Benefits

  • Mild odor, light color combinations with chlorinated paraffins and overbased sulfonates are suitable for machining high alloy and stainless steel metals.
  • Transparency of cutting fluids provides high work piece visibility.
  • Excellent extreme pressure/anti-wear properties
  • More environmentally acceptable
  • Provides good surface finishes
  • Non-staining
  • Excellent rust inhibition
  • Low odor
     

Typical Key Properties:

PSO NEAT METAL CUTTING OIL ISOVG-22 ISOVG-32
Kinematic Viscosity
@ 40°C, cSt
100°C  cSt 
(ASTM D445)
22.2
4.4 
31.8
5.4 
Viscosity Index
ASTM D2270 
105 104
Flash Point(COC),
°C ASTM D92
178 186
Pour Point,
°C  ASTM D97
-33 -39
TBN mg KOH/g ASTM 2896 19 20.7


These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

SOLCUT OIL
 

Description

PSO Solcut is general purpose oil which forms a stable milky emulsion when mixed with water. This oil contains an effective emulsifier system and biocide.
 

Applications

  • PSO Solcut oil is specially formulated for the particular requirements of mild/moderate machining operations which generate excessive heat where an effective coolant with lubricity is required.
  • It is suitable for use in machining of all metals, ferrous and non-ferrous, except magnesium (soluble oil promotes burning of magnesium metal).
  • PSO Solcut Oil - due to its tendency to permit setting of dirt - is also recommended for most grinding operations.
     

Benefits

  • Permit rapid separation of chips and grinding dirt.
  • Protect cutting tool from rust and corrosion and facilitate cutting and machining process.
  • Forms stable emulsion in soft/hard water.
     

Typical Key Properties:

PSO SOLCUT Oil Typical Results
Kinematic Viscosity @40°C,
cSt  ASTM D-445
20.7
Viscosity Index
(ASTM D-2270)
110
Flash Point, (C0C),
°C ASTM D-92
92
Emulsion Stability,
24-hrs 5% in water IP-263
Stable
Total Acid Number,
mg,KOH/g ASTM D-974 
5.5
Copper Corrosion 3-hrs at 110°C
ASTM D-130
1a


These typical characteristics are of existing production, the future production will conform to PSO blending specifications hence any variation in these characteristics will not affect the product performance.