Carient fully synthetic motor oil (with ai formula)
 

Description

PSO CARIENT FULLY SYNTETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions.
 

Applications

  • PSO CARIENT FULLY SYNTETIC is applicable on all kinds of precisely engineered modern passenger and sports cars.
     

Benefits

  • Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars.
  • Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection
  • Outstanding shear stability and high viscosity index extends engine’s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions
  • Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines, helping maintain fuel economy and a cleaner environment
  • Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures
  • Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade.
     

Performance Standards

API SN /CF
SAE 5W-30

Typical Key Properties:

PSO CARIENT FULLY SYNTETIC SAE
5W-30 
Kinematic Viscosity @100°C,cSt
ASTM D445
10.77
Viscosity Index
ASTM D2270
151
Flash Point (COC), °C
ASTM D92
240
Pour Point, °C
ASTM D97
-39
Total Base Number,
mgKOH/g ASTM D2896
8.42

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

PSO House, Khayaban-e-Iqbal, Karachi-75600 – Pakistan Tel: (92-21) 920 3866-90 fax (92-21) 920 3769 Website:www.psopk.com

CARIENT ULTRA MOTOR OIL - Synthetic Formula (With Ai Formula)
 

Description

PSO CARIENT ULTRA is a premium quality synthetic formula fortified with Advance Additive Component Technology. PSO CARIENT ULTRA ensures a robust and longer service than conventional oils. It provides engine protection, maintains viscosity at high and low temperatures and thus ensures easy start-up and excellent wear protection at high temperatures. PSO CARIENT ULTRA also provides engine parts with strong protection against corrosion and acid formation. The anti-oxidative characteristics resist oil degradation / control oil thickening.

Applications

  • PSO CARIENT ULTRA is developed for high speed four stroke turbocharged or naturally aspirated gasoline engines. It is equally suitable for all types of stationary and off-road gasoline engines.
     

Benefits

  • Premium quality synthetic formula multigrade engine oil suitable for modern passenger cars.
  • Advanced additive and base oil technology ensures protective oil film strength at extreme temperatures and load conditions reducing friction between moving parts, enhancing fuel efficiency.
  • Good thermal and oxidation stability extends oil drain interval and ensures less engine component deposits.
  • Excellent corrosion protection properties provide relief from rust and corrosion caused by acid formation and extend engine component service life.
  • Uniform molecular technology provides protection from cold temperature startup wear, reducing energy losses improving fuel efficiency.
  • High detergency and excellent dispersal control deposits at a wider temperature range keeping engine components clean, removing contaminants from oil supply lines and ensuring perfect lubrication.
     

Performance Standards

API SM /CF
SAE 10W-40


Typical Key Properties:

PSO CARIENT FULLY SYNTETIC SAE
10W-40 
Kinematic Viscosity @100°C,cSt 
ASTM D445 
14.8
Viscosity Index
ASTM D2270 
158
Flash Point (COC), °C
ASTM D92 
218
Pour Point, °C
ASTM D97
-24
Total Base Number, 
mgKOH/g ASTM D2896
6.75

 

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

CARIENT PLUS MOTOR OIL (With Ai Formula)
 

Description

PSO CARIENT PLUS is a superior multi-grade engine oil formulated to meet the requirements of gasoline and diesel engines. The oil is blended with high quality base oils and advance additive technology to provide extended drain interval with full performance satisfaction on road and off road stationary gasoline engines.
 

Applications

  • Recommended for use in passenger car engines including gasoline and turbocharged diesel engines.
  • The SAE 20W-50 viscosity grade is applicable to the engines operating under extreme weather conditions.
     

Benefits

  • PSO Carient Plus ensures rapid circulation and easy cranking at start-up and extra protection at high operating temperature.
  • Improved anti-wear control, especially in high performance engines.
  • Increased engine deposit control.
  • Improved high temperature oxidation control, which is important for engines operating at severe climatic conditions and hot weather.
  • Improved protection against rust & corrosion.
  • Improved protection during start-up by maintaining protective oil film.
  • Improved control of volatility and oil consumption.
     

Performance Standards

API SG/CD
SAE 20W-50
US MIL 2104E
US MIL 46152D
CCMC G-4
JAPANESE SE


Typical Key Properties:

PSO CARIENT ULTRA SAE
20W-50 
Kinematic Viscosity @100°C,cSt 
ASTM D445
19.6
Viscosity Index
ASTM D445
128
Flash Point (COC), °C
ASTM D92
230
Pour Point, °C
ASTM D97
-18
Total Base Number, 
mgKOH/g ASTM D2896
9.1

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

CNG PLUS MOTOR OIL
 

Description

PSO CNG PLUS is blended with an advanced additive technology in multi-grade version. It is a high performance engine oil designed to combat the high combustion temperatures of CNG fuel operated engines. PSO CNG Plus provides optimum protection against oxidation and improves drain intervals.

PSO CNG PLUS is developed with selected additive components technology and high quality paraffinic base stocks to control high temperature deposits that are generated due to the combustion of CNG. The oil is designed to give excellent performance for a longer period under severe operating conditions. PSO CNG PLUS ensures excellent engine performance under extreme climatic conditions.
 

Applications

  • PSO CNG PLUS is designed for naturally aspirated or turbocharged vehicles operating under moderate to severe load conditions.
     

Benefits

  • As CNG is dry fuel hence PSO CNG PLUS provides appropriate lubrication to the valve seat and protects against valve recession.
  • PSO CNG PLUS provides extra protection, oxidation stability and longer service life to engine components operating under high temperatures in CNG fuelled combustion chamber.
  • PSO CNG PLUS is formulated with special antioxidant additives to enhance engine life and increase oil drain intervals and reduce sludge formation.
  • Equally suited for both CNG and gasoline engines.
  • Provides improved protection against piston and ring groove deposits, controls oil consumption and wear.
     

Performance Standards

SAE 20W-50
API SG/CD meets or exceeds

Typical Key Properties:

PSO CARIENT SUPER SAE
20W-50 
Kinematic Viscosity @100°C,cSt ASTM 
D445
19.44
Viscosity Index
ASTM D2270
122
Flash Point (COC), °C
ASTM D92
238
Pour Point, °C
ASTM D97
-18
Total Base Number, 
mgKOH/g ASTM D2896
8.4
Sulphated Ash % Wt(ASTM D874) 0.78

These typical characteristics are of existing production, the future production will conform to PSO blending specifications hence any variation in these characteristics will not affect the product performance.

CARIENT SUPER MOTOR OIL (With Ai Formula)
 

Description

PSO CARIENT SUPER is specially designed for use in passenger car engines including gasoline or diesel units. It is blended with high viscosity index mineral base stocks and selected additives system to provide superior cleanliness to ring piston and other engine components. The oil resists oxidation, protects against wear, rust & corrosion in extreme operating conditions.
 

Applications

  • It is designed to meet the requirements of gasoline and diesel engine manufacturers. Ideal for use in a fleet of mixed vehicles.
  • PSO Carient Super protection is applicable to both naturally aspirated and turbo charged 4-stroke gasoline.
     

Benefits

  • Good protection during start-up.
  • High temperature protection especially in hot climates.
  • Protects against soot, varnish, sludge formation, acid and corrosion.
  • Improved oil consumption control compared to  mono-grade.
  • The SAE 20W-50 viscosity grade ensures rapid circulation and protection at low operating temperatures.
     

Performance Standards

API SF/CC
US MIL 2104E
US MIL 46152D
CCMC G-2
JAPANESE SE

Typical Key Properties:

PSO CARIENT SUPER SAE
40 
SAE
20W-50 
Kinematic Viscosity 
@100°C,cSt ASTM D445 
14.6 19.34
Viscosity Index
ASTM D2270 
99 124
Flash Point (COC), °C
ASTM D92 
240 234
Pour Point, °C
ASTM D97 
-6 -18
Total Base Number, 
mgKOH/g ASTM D2896 
5.1 5.1

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

CARIENT ADVANCE MOTOR OIL SAE 40 / 20W-50
 

Description

PSO CARIENT ADVANCE is multi-grade engine oil, specially designed for use in passenger car engines including gasoline or diesel units. It is blended with high viscosity index mineral base stocks and selected additives system.
 

Applications

  • It is designed to meet the requirements of gasoline and diesel engine manufacturers where API SE/CC is recommended
  • Ideal choice for mix fleet operators.
     

Benefits

  • Maintains protective oil films at start-up and during operating at high RPM.
  • High temperature protection especially in hot climate.
  • Protects against soot, varnish, and sludge formation.
  • Protects the engine components from rust & corrosion due acid formation as a by-product of combustion process.
  • Improves oil consumption control as compared to a mono-grade.
     

Performance Standards

API SE/CC
US MIL 2104E
US MIL 46152D
CCMC G-2
JAPANESE SE

Typical Key Properties:

PSO Carient Advance SAE
40 
SAE    20W-50
Kinematic Viscosity 
@100°C,cSt ASTM D445 
14.5 19.8
Viscosity Index
ASTM D2270 
102 127
Flash Point (COC), °C
ASTM D92 
246 238
Pour Point, °C
ASTM D97 
-6 -18
Total Base Number, 
mgKOH/g ASTM D2896 
6.0 6.12

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

CARIENT EXTRA MOTOR OIL
 

Description

The PSO Carient Extra series is blended with high quality mineral base stocks and especially selected additives system designed for use in naturally aspirated 4-stroke gasoline and diesel engines. These oils provide superior detergency, resistance to oxidation, rust and wear protection.
 

Applications

  • PSO Carient Extra is available in five mono-grade versions to meet the specific requirements of gasoline and diesel engines according to their climatic and operational needs.
  • These oils are especially designed for petrol engines operating under severe operational conditions.
     

Benefits

  • Provide efficient performance over a wide range of operating circumstances.
  • Excellent control of oxidation, corrosion, wears and oil consumption.
  • Longer drain interval than SC/CC oils
     

Performance Standards

API SD/CC
US MIL 2104B

Typical Key Properties:

PSO CARIENT Extra SAE
10W 
SAE
20 
SAE
30 
SAE
40 
SAE
50 
Kinematic Viscosity @100°C,cSt
ASTM D445
6.3 8.9 10.7 14.3 19.5
Viscosity Index
ASTM D2270 
106 103 102 102 102
Flash Point (COC), °C
ASTM D92 
194 212 236 240 245
Pour Point, °C
ASTM D97 
-27 -21 -9 -6 -6
Total Base Number, 
mgKOH/g ASTM D2896 
5.0 5.1 5.1 5.7 5.1

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

CARIENT MOTOR OIL
 

Description

The PSO Carient series consist of high performance engine oils formulated from good quality base oils which incorporate a balanced additive package to meet the demands of both diesel and petrol engine vehicles used under moderate to severe service conditions.
 

Applications

  • The PSO Carient range of oils is available in five different versions, and has been especially designed for mixed fleet operation under arduous conditions
  • These oils meet API service SC/CC as well as MIL-L-2104B and are not recommended for super-charged engines where the manufacturers specify a lubricant to API service CD or MIL-L-2104C performance standards.
     

Benefits

  • Provide efficient lubrication over a wide range of operating temperature.
  • Excellent control of oxidation, corrosion and wear.
  • Controls oil consumption.
     

Performance Standards

SAE 10,20,30,40,50
API SC/CC
US MIL 2104B

Typical Key Properties:

PSO Carient  SAE
10W
SAE 20 SAE 30 SAE 40 SAE 50
Kinematic Viscosity @100°C,cSt
ASTM D445
6.4 8.9 10.8 14.2 19.7
Viscosity Index
ASTM D2270
101 100 102 102 99
Flash Point (COC), °C
ASTM D92
196 220 234 234 244
Pour Point , °C
ASTM D97
-27 -21 -6 -6 -6
Total Base Number, mg,KOH/g
ASTM D2896
4.9 5.2 5.6 5.6 5.2

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance.

PREMIER MOTOR OIL 30/40
 

Description

PREMIER MOTOR OIL 30/40 is a good performance engine oil designed to meet the requirements of naturally aspirated gasoline and diesel engines working under moderate service conditions where API SC or CC performance level oil is applicable.
 

Applications

  • PREMIER MOTOR OIL 30/40 is suitable for both automotive and stationary gasoline and diesel engines.
  • PREMIER MOTOR OIL 30/40 is suitable for cars, vans, small trucks and light commercial vehicles.
  • This oil meets API service SC/CC as well as MIL-L-2104B and is recommended for naturally aspired engines.
     

Benefits

  • Provides efficient lubrication over a wide range of hot operating conditions.
  • Good control of oxidation, corrosion and wear.
  • Controls high temperature deposits.
     

Performance Standards

API SC/CC meets or exceeds
US MIL 2104B

Typical Key Properties:

MOTOR OIL 30/40 Typical Results
Kinematic Viscosity @100°C,cSt 
ASTM D445 
12.7
Viscosity Index
ASTM D2270
87
Flash Point (COC), °C
ASTM D92
234
Pour Point, °C
ASTM D97
-6
Total Base Number, 
mgKOH/g ASTM D2896
4.3

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance

MOTOR OIL 30/40
 

Description

MOTOR OIL 30/40 is a good performance engine oil designed to meet various automotive and stationary engines operating on gasoline and diesel fuel. Motor Oil 30/40 is also suitable for agriculture generators and petter engines where API SC or CC performance level oil is applicable under moderate service conditions.
 

Applications

  • MOTOR OIL 30/40 is suitable for automotive and agriculture stationary engines.
  •  MOTOR OIL 30/40 is applicable for both gasoline and diesel engines.
  •  MOTOR OIL 30/40 is suitable for cars, vans, small trucks and light commercial vehicles.
     

Benefits

  • Provides efficient lubrication over a wide range of hot operating conditions.
  • Good control of oxidation, corrosion and wear.
  • Controls high temperature deposits.
     

Performance Standards

API SC/CC meets or exceeds

Typical Key Properties:

MOTOR OIL 30/40 Typical Results
Kinematic Viscosity @100°C,cSt
ASTM D445
11.3
Viscosity Index
ASTM D2270
80
Flash Point (COC), °C
ASTM D92
234
Pour Point, °C
ASTM D97
-6
Total Base Number, 
mgKOH/g ASTM D2896
4.5

These typical results are of existing production, the future production will conform to PSO blending specifications hence any variation in these results will not affect the product performance